Deeplink long-term operation process
Deeplink long-term operation process
1. List equipment that meets Deeplink mining requirements on the DBC chain
1.1 Equipment requirements
- Reference: https://orion.deeplink.cloud/longterm
1.2 Install Deeplink software
Software download address: https://www.deeplink.cloud/software
If you are using a local disk device, just download and install Deeplink and log in to your wallet
If you are using a diskless system to drive a GPU device, please pay attention to the following operations:
Install Deeplink in super mode
Open the configuration file (%appdata%\deeplink\config.ini)
Delete the "uuid" \ "machine_id" in the "[host]" option, keep the token, and delete all the contents of the "[device]" option (the token must be kept, otherwise the GPU device under this diskless server cannot be associated with your wallet)
- Save and shut down, then package this image as a boot image
- GPU device startup verification, confirm that your GPU device does not use the same ID and password
1.3 Add the device to the DBC network
2. Rent your device on the DBC chain and bind the EVM wallet address
2.1 Rent equipment (Note: Users participating in DeepLink mining must use the fund account address of the listed device to rent, otherwise the launch of the deeplink contract will fail)
2.2 Confirm the rental
Tip: Confirm the rental within 15 minutes after the rental
- Check the rental order number
- Enter the rental order number to confirm the rental
- Relet machine
- Bond EVM wallet address
3. Add the device to Deeplink long-term rental mode mining
3.1 GPU mining page
3.2 Stake NFT and DLC to start mining
- Stake NFT
- Pledge DLC (you don’t have to pledge, but the more you pledge, the higher your returns will be)
3.3 After the pledge is completed, enter the competition page to query your device
- Competition page: https://orion.deeplink.cloud/device